tysk flag danish flag US flag norsk flag svensk flag fransk flag finsk flag
Info@exodraft.co.uk
E-mail address
+44 (0)1494 465 166
Phone number
10 Crestway, Tarleton
GB-Preston PR4 6BE

EBC24

The exodraft EBC24 is a true PID-based fan speed control used to maintain a constant pressure or draught in a flue/duct system. It can only be used with exodraft fans.

The control automatically adjusts the speed based on the amount of exhaust gasses in the flue.

Description

EBC24 can control the fan speed on a single phase AC motor directly (1x230V) or a three-phase motor indirectly via a VFD (variable frequency drive) that adjusts the motor speed.

The control has an integrated safety system to assure that heating appliances connected to the flue system will be shut down in case of insufficient draught. This ensures safe operation at all times, regardless of external factors (e.g. weather conditions).

exodraft-ebc24-control600x350

The EBC24 control is not restricted to any type of fuel, heating appliance or chimney.The unit features “plug-and-play” to automatically monitor all terminals and register components attached to the control during initial start-up. It comes pre-programmed from the factory, but can be further programmed in the field using the LCD 128×64 dot display and buttons.

The EBC24 has two heating appliance interlock circuits as standard but can be expanded in multiples of four with the use of additional relay boards (ES12).

exodraft-ebc24-control600x350-2

A self-diagnostic panel with LEDs monitors all connection terminals for easy service and troubleshooting. Provided the integrated safety system is satisfied, interlocked heating appliances are allowed. Programming or reading out data is done via a USB port.

The EBC24 has an alarm output for a BMS-system. An alarm via a buzzer can also be made through the buzzer output.

The EBC24 has terminals for connecting a RS485 communication BUS.

Technical Specifications
Product Range
Accessories
Documentation

Control EBC24
Dimension (H x W x D) 175 x 175 x 110 mm
Weight 1.5 kg
Density class IP 54
Control range 0 Pa – 150 Pa
Fuse 4.0T
Voltage 230 V AC, 50 Hz
Power consumption 350 W
Ambient temperature -20 ºC – +50 ºC
Material ABS PA758
XTP sensor:
XTP sensor:
Dimension (H x W x D) 80 x 82 x 55.5 mm
Ambient temperature -25 ºC to +50 ºC
Max. Distance to EBC20 XTP-sensor 100 m
Density class IP 54

Didn't find the right solution?

Contact us – and together we’ll find a solution that is just right for you, whether it is a mechanical chimney draught – or industrial heat recovery.

Contact us
 Didn't find the right solution?