The RSHT chimney fan is designed to operate under extreme conditions with very high flue gas temperatures.
The patented cooling wheel allows continuous operation of the chimney fan at temperatures up to 500 ° C. Peak loads (up to 3 minutes) with temperatures up to 700 ° C are possible with the RSHT. The chimney fan is part of an exodraft system and must be connected to an exodraft control. See below for matching accessories.
The RSHT has a horizontal discharge and is made of stainless steel with an aluminium housing. The chimney fan is equipped with a stainless steel axial impeller. The same is true for all screws and bolts. The engine is a heat-resistant asynchronous motor in an enclosed construction with sealed, maintenance-free ball bearings that is continuously adjustable with a TRIAC control.
The cable is heat resistant and strain relieved and protected by a reinforced hose casing.
All of these combined give the chimney fan high operational reliability and a long service life.
The chimney fan is hinged, which means the chimney sweeper has easy access to sweep the chimney.
A protective stainless steel grille is mounted to prevent contact and stop birds from entering the chimney.
|Rev / min.||Voltage||Amp||kW||Weight|
|RSHT009||1400||1 x 230 V||0.26 A||0.06||12 kg|
|RSHT012||1400||1 x 230 V||0.55 A||0.09||15 kg|
|RSHT014||1400||1 x 230 V||1.0 A||0.19||19 kg|
|RSHT016||1400||1 x 230 V||1.9 A||0.31||22 kg|
|Download Full Data Sheet|
Chimney fan with centrifugal impeller made of stainless steel and aluminium. Capacity up to 720m³/hr.
The EFC15 is a continuously variable electronic speed control for manual operation of exodraft chimney fans
The EW41 is an automatic remote controlled control for exodraft chimney fans. It has an automatic temperature control, a signal to refuel, a boost function and an automatic stop function
The EFC18 control is an electronic 9-speed control with an integrated automatic start/stop and boost function for the exodraft chimney fans
The EFC16 is a continuously variable electronic speed control for manual operation of exodraft chimney fans
The EBC20 / 22 is an automatic control for exodraft chimney fans on boilers and large systems
Rainshield for the exodraft RS009 and RSHT009 chimney fans
The exodraft flange system is used to mount the exodraft chimney fan on to steel chimneys