10 Crestway, Tarleton - GB-Preston PR4 6BE - UK
+44 (0)1494 465 166
Follow us:

    RS009-016

    The exodraft chimney fan type RS are exhaust fans that are designed so that the smoke discharges sideways (horizontal).

    Well suited for solid fuels

    The chimney fan can be used for all types of fuels but is particularly suitable for solid fuel boilers, fireplaces and stoves.

    The axial impeller is made of stainless steel, which makes it easy for chimney sweeps to remove soot and deposits.Picture12

    As the chimney fan is mounted on top of the chimney, a vacuum is created in the flue pipe and the chimney. The chimney fan is part of an exodraft system and must be connected to an exodraft control. See below for matching accessories.

    Robust Design

    exodraft RS chimney fans are designed so that they are suitable for continuous use at temperatures up to 250 ° C. The chimney fan is made of cast aluminium; all screws and bolts are made of stainless steel.

    The engine is an enclosed heat-resistant asynchronous motor with permanently lubricated ball bearings, which is protected from the flue gas.

    A special cooling vane wheel and cooling air slots safely ensure continuous cooling of the motor. The cable is heat resistant and strain relieved and protected by a reinforced hose casing.

    All of these combined give the chimney fan high operational reliability and a long service life.

    The chimney fan can be opened so that a chimney sweep can easily clean the chimney. In the discharge opening, a stainless safety mesh is mounted to protect fingers and birds.

    Different models for masonry and steel chimneys

    The models RS009-016 are supplied in two different versions:

    Square mounting plate for brick chimneys and octagonal mounting plate for steel chimneys.


    Rev / min.

    Voltage

    Amp

    kW

    Weight

    RS009
    14001 x 230 V0.3 A0.059 kg

    RS012
    1400 1 x 230 V 0.3 A 0.09 14 kg

    RS014
    1400
    1 x 230 V
    0.6 A 0.13 18 kg

    RS016
    1400
    1 x 230 V
    1.2 A 0.29 25 kg

    Download Full Data Sheet
    RS009-4-1
    Round chimney fan. Capacity up to 1,000 m³/hr.
    With axial impeller made of stainless steel and four square mounting plate.
    RS009-4-1-02
    Round chimney fan. Capacity up to 1,000 m³/hr. With axial impeller made of stainless steel and eight square mounting plate.
    RS012-4-1
    Round chimney fan. Capacity up to 2,250 m³/hr.
    With axial impeller made of stainless steel and four square mounting plate.
    RS012-4-1-02
    Round chimney fan. Capacity up to 2,250 m³/hr. With axial impeller made of stainless steel and eight square mounting plate.
    RS014-4-1
    Round chimney fan. Capacity up to 3,100 m³/hr.
    With axial impeller made of stainless steel and four square mounting plate.
    RS016-4-1
    Round chimney fan. Capacity up to 3,750 m³/hr.
    With axial impeller made of stainless steel and four square mounting plate.
    EFC15

    The EFC15 is a continuously variable electronic speed control for manual operation of exodraft chimney fans.

    EFC16

    The EFC16 is a continuously variable electronic speed control for manual operation of exodraft chimney fans.

    EFC18

    The EFC18 control is an electronic 9-speed control with an integrated automatic start/stop and boost function for the exodraft chimney fans.

    EW41

    The EW41 is an automatic remote controlled control for exodraft chimney fans. It has an automatic temperature control, a signal to refuel, a boost function and an automatic stop function.

    EBC20/22

    The EBC20 / 22 is an automatic control for exodraft chimney fans on boilers and large systems.

    Rainshield

    Rainshield for the exodraft RS009 and RSHT009 chimney fans

    Flanges

    The exodraft flange system is used to mount the exodraft chimney fan on to steel chimneys.

    Posted by bech_morten / Posted on 04 Jan
  • Post Comments 0